שרף עמיד לחום גבוה!
High Temp Resin מציע טמפרטורת דחיית חום (HDT) של 238 °C @ 0.45 MPa, הגבוהה ביותר מבין כל החומרים של Formlabs. השתמש ב-High Temp Resin להדפסת אב טיפוס מדויק ומפורט, עם עמידות גבוהה בחום.
בחר ב-High Temp Resin עבור:
✅ חלקים שנחשפים לאוויר חם, גז וזרימה של נוזלים.
✅ רכיבים, מארזים ותחזוקות עמידות בחום.
✅ תבניות והכנסות.
נתוני חומר:
| Property | Metric 1 | Imperial 1 | Method |
|---|---|---|---|
| Green 2 | Post-Cured for 120 min at 80 °C and 180 min at 160 °C 4 | Post-Cured for 60 min at 60 °C 3 | |
| Green 2 | Post-Cured for 120 min at 248 °F and 180 min at 356 °F 4 | Post-Cured for 60 min at 176 °F 3 | |
Tensile Properties
| Property | Metric 1 | Imperial 1 | Method |
|---|---|---|---|
| Ultimate Tensile Strength | 21 MPa 58 MPa 49 MPa | 3031 psi 8456 psi 7063 psi | ASTM D638-14 |
| Tensile Modulus | 0.75 GPa 2.8 GPa 2.8 GPa | 109 ksi 399 ksi 406 ksi | ASTM D638-14 |
| Elongation at Break | 14% 3.3% 2.3% | 14% 3.3% 2.3% | ASTM D638-14 |
Flexural Properties
| Property | Metric 1 | Imperial 1 | Method |
|---|---|---|---|
| Flexural Strength at Break | 24 MPa 95 MPa 97 MPa | 3495 psi 13706 psi 14097 psi | ASTM D790-15 |
| Flexural Modulus | 0.7 GPa 2.6 GPa 2.8 GPa | 100 ksi 400 ksi 406 ksi | ASTM D790-15 |
Impact Properties
| Property | Metric 1 | Imperial 1 | Method |
|---|---|---|---|
| Notched Izod | 33 J/m 18 J/m 17 J/m | 0.61 ft-lb/in 0.34 ft-lb/in 0.32 ft-lb/in | ASTM D256-10 |
Thermal Properties
| Property | Metric 1 | Imperial 1 | Method |
|---|---|---|---|
| Heat Deflection Temp. @ 1.8 MPa | 44 °C 78 °C 101 °C | 111 °F 172 °F 214 °F | ASTM D648-16 |
| Heat Deflection Temp. @ 0.45 MPa | 49 °C 120 °C 238 °C | 120 °F 248 °F 460 °F | ASTM D648-16 |
| Thermal Expansion | 118 μm/m/°C 80 μm/m/°C 75 μm/m/°C | 41 μin/in/°F 44 μin/in/°F 41 μin/in/°F | ASTM E831-13 |
Solvent Compatibility
| Solvent | 24 hr Size Gain (%) | 24 hr Weight Gain (%) |
|---|---|---|
| Acetic Acid 5% | < 1 | < 1 |
| Acetone | < 1 | 2 |
| Bleach ~5% NaOCl | < 1 | < 1 |
| Butyl Acetate | < 1 | < 1 |
| Diesel Fuel | < 1 | < 1 |
| Diethyl Glycol Monomethyl Ether | < 1 | 1 |
| Hydraulic Oil | < 1 | < 1 |
| Hydrogen Peroxide (3%) | < 1 | < 1 |
| Isooctane (aka gasoline) | < 1 | < 1 |
| Isopropyl Alcohol | < 1 | < 1 |
| Mineral Oil (Light) | < 1 | < 1 |
| Mineral Oil (Heavy) | < 1 | < 1 |
| Salt Water (3.5% NaCl) | < 1 | < 1 |
| Skydrol 5 | < 1 | 1.1 |
| Sodium Hydroxide Solution (0.025% PH 10) | < 1 | < 1 |
| Strong Acid (HCl conc.) | 1.2 | < 1 |
| Tripropylene Glycol Monomethyl Ether | < 1 | < 1 |
| Water | < 1 | < 1 |
| Xylene | < 1 | < 1 |
