[ 05.5.1 // SPECS ]
Technical specifications
- Tolerance
- ±0.1 mm
- Layer height
- 20–60µm
- Build volume
- 300× 300× 300
- Finish
- Rough - needs post
- Lead time
- 7–14 days
- Density
- >99.5%
[ 05.5.2 // TRADE-OFFS ]
Strengths & limitations
Strengths
- Near-full density metal parts
- Complex geometries (internal channels, lattice)
- True engineering-grade mechanical properties
- Significant weight savings with optimized design
Limitations
- Higher cost - suited for high-value parts
- Requires supports and removal from build plate
- Heat treatment required for most applications
[ 05.5.3 // MATERIALS ]
Available materials
| Material | Typical uses |
|---|---|
| Ti6Al4V (טיטניום) | Aerospace, medical, implants |
| AlSi10Mg (אלומיניום) | Automotive, aerospace - light and strong |
| 316L Stainless | Industrial, food-grade, medical |
| Inconel 718/625 | Jet engines, extreme heat |
| Maraging Steel | Injection molds, tooling |
[ 05.5.4 // BEST FOR ]
Best suited for
- Aerospace and defense parts
- Custom medical implants
- Injection molds with conformal cooling
- Topology-optimized lightweight parts
[ 05.5.5 // FAQ ]
FAQ
Can SLM parts replace CNC-machined parts?
Yes - especially for complex geometries or weight savings. For simple parts CNC is still more economical.
What's the final finish?
As-built surface is rough. We offer machining, polishing, anodizing and coatings as needed.
Ready to push your next product forward?
We reply within one business day.